How to Add PowerVu, Biss Key & Update Software for All Receivers

To view Paid (encrypted) channels for free on your receiver you have to enter the following Biss (Basic Inter operable Scrambling Systems) key correctly.  Adding this BISS Key correctly will give you access to watch all HD Sport and Entertainment channels using your decoder. This post will guide you on how to enter biss key and unlock channels on your receiver. If you can’t understand the procedures on this post, contact your local technician for guidance. 

    Download Nurstar LEG N-24 and LEG A-25 Powervu Autoroll Software

    This post will be list the latest Powervu Software auto software for Nurstar LEG decoders that will allow you watch mtnworldwide/Sport24HD.

    This page will be updated frequently with the latest LEG N-24 and LEG A-25 receiver software. – Read More 

     

     

    Download FreeSat, Alphabox and Strong Decoder Power Software 2017

    This post will list out that latest powervu autoroll software for Freesat, Gsky, Alphabox, Strong, Tiger, Cobox/Qsat, Corronet, Nurstar, Lifestar, HD Tech, Hisi3796, Funnybox and Digisat Decoder to unscramble Sport 24HD and Sony Package. – Read More 

    Also Read: LifeStar Software Update

    Enter PowerVu, Biss key on ECHOLINK EL-880D HD RECEIVER

    Settings > System Start up > ENTER (2778).
    ACCESS CONTROL WILL BE ENABLE
    THEN PRESS POS BUTTON ON REMOTE
    ADD THE BISS KEY. 

    Also Read – Download Latest QSAT Software (Improved Performance on Powervu and Canalsat)

    How to Enter Biss Key into NEWMAX 771 HD USB PVR RECEIVER

    To enabled Biss Key Option on your Screen simply press PRESS 8899 THEN PRESS EXIT BUTTON ON REMOTE.
    Now press preview button on your remote.

    Add PowerVu to Neosat 550D Satelite Receiver
    Step 1: First of all press 9339.
    Step 2: Select Key Editor and choose Biss Key.
    Step 3: Choose any old added biss key and replace it or add New Key (Example 16 digits, use any numbers).
    Step 4: Change the CAID from 2600 to 0b00 or 0e00.
    Step 5: Now Save and Exit it.
    Step 6: Change the channel and come back to that channel.
    Step 7: Press 9339 again, go to Key Editor>Biss Key>Add
    PowerVu (ECM) Key there. The option of PowerVu will be enabled there.



    How to add PowerVu Key to Neosat 560D HD Satelite Receiver
    Go to menu>Access control> Key editor> PowerVu> edit or add new> Save.
    Go to menu Press 8888, 9999, 0000, 1234, 1122 (Key editor opened)>PowerVu> add new or edit>Save.

    Done, you’ve successfully added the PowerVu ecm key in your satellite receiver.


    How to enter Biss Key in Strong (SRT 469Xii, 4669x, 4920, 4922, 4922A etc) Decoders
    To activate Biss Key Menu on strong decoder, begin by pressing 8280 quickly on your remote control. This is open up a new screen.

    If nothings happens, you need to first activate your decoder biss key option by pressing 6969. This will open a box that will require a password, press 6969 again. Now, press 8280 to enter the Biss Key Menu.

    Enter Biss Key NEOSAT, G BOX, Superlazer
    NEOSAT 1600 PLUS CHINA
    ON INFO 4 TIME PRESS {0000}
    NEOSAT 9800I-S
    Main Ver 1.71 G4C5M2S3[R1619]
    Boot Ver 1.34
    Data Ver 24
    First u select ur channel then
    1 – Press MENU ( Remote control )
    2- Press RED button ( Remote control )
    3 – You will notice a small WINDOW BOX to edit keys ( TV screen )
    G BOX Add Biss Key
    1. MENU
    2. GAME
    3. enter 2356
    4. Select “EDIT kiy”
    5. CODE MENU will appear
    Superlazer 16000 Starbox 7400 Tracksat
    1. Press Menu
    2. and 99999
    How to add biss key TechView, MediaCom, Strong
    TechView
    Press RED button 4 Times to Activate Code Menu
    MediaCom MFT930i Add Biss Key
    1. Menu
    2. Enter 1234 (code menu will appear)
    3. RED (viaccess) , GREEN (SECA), YELLOW (IRDETO), BLUE (NEGRA) MENU ( CONEX)
    OR
    1. Menu
    2. Enter 9300 and select CODE EDIT
    Strong 3680
    Press Menu
    Goto Innformation system (note donot press ok just hilight it)
    enter any of these number 9696 or 8282 or 7799 Code menu will appear
    How to Enter Biss Key Starsat, EUROMAX, STAR TRACK
    Starsat 1400d changed to tigre active ** F1+000 menu of code :go to menu and choose istallation and go to ** menu
    EUROMAX 360i, STAR TRACK 750 HD, STAR TRACK PLATIUM 1,2
    Option 1
    Menu(GoTo) Tv Satting press(0000) & press red
    button & add new kiy
    Option 2
    Press 3993 & add new key
    Option 3
    Press info button, & 2time Press Red button & add new kiy
    How to enter Biss Key Showbox, STARSAT, ECHOLINK
    Showbox:
    1. Menu
    2. Enter 2580 – track star 999 hd
    press on scren 8899 ok and prev ka buttan lagao biss kiy option agy ga.
    STARSAT 9999 HD Add Biss Key BISS key
     OPTION>>
    Press ok and go to the biss coded channel that you want to watch,press ok on the channel and wait untill you see `SCRAMBLED CHANNEL` or
    `ENCRYPTED CHANNEL` on the screen,now press the RED kiy and it will take you to The Key- Editing Menu
    ECHOLINK 220-HD-MPEG4
    BISS KEYS OPTION Manu main ja K 2020 Code
    lagain case ka option open ho jay ga us main biss kiy ko select kar ke key dal den
    How to add biss key STARTRACK SRT
    STARTRACK SRT 2016 EXTRA
    1ST PRESS INFO BUTTON THEN PRESS RED BUTTON BISS kiy OPTION WELL BE OPEN StarTrack SRT-4200 Full Hd Reciever me biss key optin phele us chinal pe aao js mn kiy add karni he..pher info ka battn 2 bar perss karn.pher 2bar red battn ko perss karo.kiy option aae ga,pher only kiy dalo .ok karo chinal chal jae ga


    Tiger-800 HD Add Biss Key
    There two method to upload key at Tiger 800 HD Fist just download softcam and put in usb and install Tiger 800 HD auto update all keys
    here is softcam for ptv sport download it:-
    http://www.mediafire.com/?w5as496bxzh22oa
    Second manual enter :-
    1:Goes to patch menu and select Biss
    2:Press Red button or edit any key
    3: Press F1 and enter ptv sport key frequency
    4: Enter compete key and press OK
    Supermax receivers dongal & Biss option
    1.Sm2300 HD
    Dongle (Micro Box) Support : Direct open if not press 9339 and select SSSP(twin)
    Biss Support:
    Keep the biss channel and press RED button.
    Put the correct Biss key, channel will be open
    2. SM 9400PIP Add Biss Key
    Dongle (Micro Box) Support :
    Direct open if not Press ‘9339’ by remote and select SSSP(TWIN)
    Biss Support:
    Press information 2 times and RED button
    Put the correct Biss key,channel will be open
    3.SM 9900CA Add Biss Key
    Dongle (Micro Box) Support :
    Direcet open if not Press ‘9339’ by remote and select SSSP(TWIN)
    Biss Support:
    Automatically biss open,If not open, Press 9339 and enter into key edit.
    Go biss option and put the correct key.


    7. 9300 UHC Add Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    Press menu and press 6000 by remote controller
    New menu came and just enter into const CW
    U can see biss option and put it
    —————————————————————————-
    8. HD 5000 Add Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    First Keep the Biss channel
    Press Menu & 4132 by Remote controller and u can see Biss menu
    Red button is add biss key and put biss key and
    press OK,Exit.
    Biss channel will be open.
    (Note:if not open,delete all keys by pressing blue
    key and again put biss key.)


    9. SM 750 Add Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    First Keep the Biss channel
    Press Blue key by remote controller
    Press ADD after that Enter the channel Name &
    Biss key
    press ok (Yellow button)
    And then Save (Blue button)
    —————————————————————————-
    10.SM 2350 HDCA & SMHD 2370CA Add
    Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    First Keep the Biss channel
    Press Ok & keep channel list
    Then Press blue button by Remote controller
    Hereafter press Ok and then Enter the Biss key & press ok (Yellow button)
    And then Save (Blue button)


    11.SM 9650 USPI Add Biss Key
    Dongle (Micro Box) Support : Direct open if not press 9339 and select SSSP(twin)
    Biss Support:
    Press information 2 times and RED button
    Put the correct Biss key,channel will be open
    12. SM 2425HD, SM 2350 Power Tech and SM 2560 Brilliant Add Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    First Keep the Biss channel
    Press Ok & keep channel list
    Then Press blue button by Remote controller
    Hereafter press Ok and then Enter the Biss key & press ok (Yellow button)
    And then Save (Blue button)
    SM340HD Dream liner ,SM380 HD super jumbo &SM390 Ultra max
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    1.Press “OPT+” in remote controller
    2.Choose Biss option and press ok
    3.put the Biss number and press RED button to save.
    HD 2550 CA MINI Add Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    1.FIRST KEEP BISS CHANNEL
    2.MENU-> CONDITIONAL ACCESS-> CA
    SETTING ->KEY EDIT -> BISS -> PRESS OK
    3.DELETE OLD BISS KEYS
    4.ADD – GREEN BUTTON
    5.PUT FREQ & BISS KEY AND THEN SAVE
    6.CHANNEL WILL BE OPEN


    FT 2750 HD Add Biss Key
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    First Keep the Biss channel
    Press Ok & keep channel list
    Then Press blue button by Remote controller
    Hereafter press Ok and then Enter the Biss key &
    press ok (Yellow button)
    And then Save (Blue button)


    SM 3000 HD Add Biss Key
    Upgrade the new software from HYPERLINK
    “ http://www.newprog.net” New Prog Net
    Dongle (Micro Box) Support : Direct open
    Biss Support:
    Menu ->Installation -> patch Menu -> Manual key -> press ok
    Press Green button to add biss code
    Exit to save
    G-share : Direct open If not open
    Menu ->Installation -> patch Menu -> Server settings -> press ok -> press F1 in remote (Load default Server)
    Technosat T- 888 Digital satellite receiver Add Biss Key
    1-reboot your stb
    2-press exit then 6108(fastly) your stb will reboot after that code
    3-go to menu prantel lock there is a new step will be apper (chennel lock)
    change it to temmpory.
    4-press blue key to save.
    5-reboot your stb again and press exit 8088.
    CODE MENU ACTIVATION OF EL-909 S/W
    Version 1.0.1
    1. press menu button
    2. Then Press game option
    3. And insert 2020
    Code menu will appear
    —————————————-
    1——-> MENU
    2——-> GAME
    3——-> 2020
    NOW ACTIVE CODE MENU EUROSTAR EURRR MADE IN CHINA
    ON MENU PRESS 2010 BISS KEY OPTION WILL BE ENBLE

    THEN PRESS OK AND PRESS [3] BUTTON


    >> HOW TO ENTER BISS KEY ON ALL RECEIVER 
    >> Method to Enter Biss Key – Page 2


    How to Download the Latest PowerVu Keys Software for your Receiver

    Below are the latest powervu upgrade software for the various FTA decoders listed in this post. These are currently the best mpeg4 and mpeg2 receiver in the market today. This upgrade comes with new and important features such as AutoRoll. This is automatically update the biss key to finally put an end to entering of BISS Key manually. Now that Download the receiver software using the link below; 

    China HD Receivers

    Strong Receiver and Qsat Decoder

    How to Upgrade Qsat Decoder Software

    PowerVu software for Qsat
    Note that unless your qsat decoder has expired, don’t upgrade, because this upgrade will make you forfeit your valid avatarcam code by removing your avartacam menu and replace it with a spycam menu
    Q13G

    Q11G

    Q26G

    Q28G

    Speed HD S1

    Q23G


    How to Upgrade Strong Receiver using the Latest PowerVu Software

    Download PowerVu Software for strong 4920, 4922 or 4922A decoder HERE




    Download Powervu Auto Roll Software For Gsky HERE

    FTA Quick Links

    == Quick Links ==

    Get Updates on Latest FTA – Subscribe Now

    You may also like . . .

    Updated: August 17, 2015
    Tags:

    Thank you for reading. Your comments and suggestions will be greatly appreciated.

     

    Kindly share this information with friends if you think it was helpful.

     

    If you need latest information on content such as this, I suggest you subscribe to Bukas Blog via email using the subscription forms below and LIKE my Facebook page.

     

    Comments

    1. Hi there would you mind letting me know which webhost you’re utilizing? I’ve loaded your blog in 3 different web browsers and I must say this blog loads a lot quicker then most. Can you suggest a good web hosting provider at a honest price? Thanks a lot, I appreciate it!

      Reply

    Leave a Reply

    Your email address will not be published.

    11 − six =