Full TECNO WX3 Pro Specifications + Stock ROM Firmware Download



Hello, if this post was helpful, Kindly use 4 seconds to LIKE or Share it.

For tecno user who wish to flash their WX3 pro smartphone, this will provide a working stock ROM for your device and also a quick tutorial on how you can unbrick your tecno wx3 pro using the firmware on this post.
Below are some major specifications of tecno wx3P. Also make sure you use the right firmware version of your device.



Tecno WX3P Full Specifications
Display: 5-Inch IPS, 854×480 pixels
Build: Plastic.
Memory Card: Yes, 32GB capacity
Network: 3G
SIM: Dual Mini SIM
Internal Memory: 8GB ROM
RAM: 1 GB
Processor: 1.3GHz Quad Core MediaTek
Operating System: Android Nougat v7.0
Rear Camera: 5MP with Flash
Front Camera, 5MP with Flash
Battery: 5000 mAh.
Colours: Champagne Gold, Black.


How to Flash Tecno WX3P Using SP Flash Tool:
 Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
After format,
Select Download and click Start.

Connect device & Patiently wait for the process to complete.


Download TECNO WX3P Stock ROM
Ads

.

.



1 comment:

  1. Bros. this your stock rom, me I no understand noooo. Every time person clicks download link, the thing just de repeat the same page. Make u try correct this error. Thank you.

    ReplyDelete

I'll like to know what you think.

Leave a COMMENT below.

Readers should feel free to also provide solutions.

Offensive & Spam Comments will NOT be Approved.

Thanks!

Also Read

Google+ Followers